Photocentric imagepac 3D Daylight Resin

$880.00

Liquid Crystal 3D打印機專用Polymer打印物料

(不適用其他SLA/DLP打印機)

Liquid Crystal 3D Printer Polymer Resin

(Not compatible with other SLA/DLP printers)

Clear
SKU: imagepac-daylight-resin Categories: , , Tag:

一次買2支95折;一次買3支或以上9折。
Buy 2 and get 5% off. Buy 3 or more to get 10% off.

Description

imagepac 3D Daylight resin 是專為 Liquid Crystal 3D打印機而特別配製的Polymer打印材料,大家可以根據需要選用不同類別的產品:

 

flexible-daylight

硬度:  彈性: 

 

Flexible daylight 適合打印需要有彈性的物件。物件仍然會是堅固的,但如果用力把它擠壓或彎曲的話,它會像橡膠一般被壓縮及拗彎,然後慢慢變會原狀。


firm-daylight

Hardness:  Flexibility: 

 

Firm daylight 可以打印出非常堅固並只會有極少收縮的物件,但同時間在強大壓力或拉力下,它會有輕微的壓縮或拉長,然後慢慢變會原狀。


hard-daylight

Hardness:  Flexibility: 

 

Hard daylight 可以打印出極度堅硬並且不會在受力情況下變形的物件。打印完成品會有少量收縮情況。


 

Castable 是專門配製打印高清模具的樹脂。它被燃燒時幾乎不會留下任何灰燼,並且隨著溫度的升高而均勻地產生氣體以避免鑄件內部產生任何壓力。它可以造出非常乾燥的表面以表達您的Investment Mould所有細節。

 

重量:1kg

注意:本產品並不適用於其他SLA/DLP 3D打印機

 

 

imagepac 3D Daylight resin is tailored made for Liquid Crystal printers. See below for the different types of resins to fit your needs:

 

flexible-daylight

 

Hardness:  Flexibility: 

 

Flexible daylight polymers are ideal for making objects where you want a little flexibility, but still a hard object. Thin objects will compress and deflect enough to bend and return. They exhibit very low tensile shear properties and high elongation, objects can be bent and compressed with some force.


firm-daylight

 

Hardness:  Flexibility: 

 

Firm daylight polymers are ideal for making objects where you want a very hard object with slight compressive ability under high force and minimal shrinkage. Objects will bend a little and stretch slightly when under duress. They exhibit high tensile shear properties and limited elongation, objects can only be bent and compressed with force.


hard-daylight

 

Hardness:  Flexibility: 

 

Hard daylight polymers are ideal for making objects where you want a very hard object with no compressive ability under high force. It exhibits shrinkage. Objects will not bend or deflect when under duress. They exhibit very high tensile shear properties and almost no elongation.


 

Castable daylight resin is specially formulated to provide high definition moulds. It will leave almost no ash when burnt and create gas evenly as the temperature is increased, avoiding any pressure build up within the casting. It will capture all the details with a very dry surface to provide the ideal finish to your investment mould.

 

Weight: 1kg

NOTE: Not Compatible with other SLA/DLP Printers

Additional information

Daylight Resin Type

Castable, Firm, Flexible, Hard

Daylight Resin Colours

Amber, Black, Blue, Cream, Green, Grey, Red

Reviews

There are no reviews yet.

Be the first to review “Photocentric imagepac 3D Daylight Resin”